50W 26650 compact mod
Our Review On The Chain Reaction 50W Box Mod
Do you remember the military style box the iTaste 134 came in? It was such a big hit back then, and made one hell of a first impression. Well, the thing is we received a similar box in our mail exactly one week ago and inside we found the cool looking Chain Reaction 50W Box Mod, one of the few advanced personal vaporizers powered by a 26650 battery. Apparently this is made by a Chinese company called Amigo Itsuwa and it looks and feels legendary.
As a matter of fact, this is one of the most unique looking box mods I’ve ever reviewed and to me it looks like one of those flash grenades you see in SWAT movies. It’s made from a sleek combination of stainless steel and carbon fiber and it’s definitely a type of mod that addresses the action movie lover.
So, without further ado, let’s check out what comes inside the Chain Reaction 50W box, and I will tell you everything about it. So, the heavy duty box has some company logos engraved and a very nice locking mechanism and everything about it makes your heart eager to open it. Inside you will find the mod itself, a user’s manual, a 6 month warranty card, and a tool for adjusting the contact pin.
Besides the unique form factor, this mod also has a very original way of disassembling. The battery tube unscrews from the top and you’re left with the whole part that holds the electronics in one hand the rest in the other. The battery tube is made from copper but it has this very glossy carbon fiber finish on the exterior. The bottom cap unscrews smoothly and you can adjust the pin with the provided tool so it makes perfect contact with your battery. The contacts are also made from copper to improve electrical conductivity and the whole mod is powered by a single 26650 high amp (35A or above) type battery.
The part holding the electronics comes with the 510 connection at the top, however the pin is neither adjustable nor spring loaded. It does come with three air channels and the connection is flush at the top. Because this is 26650 mod, the diameter is 30mm so you are going to need a big tank that goes with it. I have an Aspire Mega and it looks so good on top of the Chain Reaction 50W. I guess it would also work great with the Subtank, and you don’t have to worry about sub-ohming because it can go from 0.3 Ohms all the way up to 3.0 Ohms.
On the side we have the firing button and two adjustment buttons that are all quite small in diameter and the same size and also the LCD display. The screen shows from left to right, the remaining battery, the atomizer resistance, output voltage, and current wattage. It is a variable wattage device and it can go from 7.0 up to 50W in .1W increments.
Vaping on the Chain Reaction 50W is a true pleasure and operating the device is done with great ease. You simply need to click it three time to turn it on and then adjust the wattage and you’re done. You’re going to get plenty of autonomy from a good 26650 battery but you are going to also need an external charger for it.
The only con I can think of is the fact that the 510 connector is nonadjustable. I only tested it with one tank but I suppose there could be problems with at least a couple of models out there. Everything else works perfectly and the whole design of the mod stands out. It’s definitely going to get you noticed due to the size and form factor and I’m sure many people are going to be more than satisfied with the power it delivers and the way it performs. It’s one heavy duty box mod with a very cool looks.
Conclusion | Chain Reaction 50W Box Mod
50W 26650 compact mod
Everything works perfectly and the whole design of the mod stands out. It’s definitely going to get you noticed due to the size and form factor and I’m sure many people are going to be more than satisfied with the power it delivers and the way it performs. It’s one heavy duty box mod with a very